[plug] syslog shows IRQ conflicts, eth0 went down
laurie anderson
vautin at aijv.com.au
Sat Feb 7 19:53:21 WST 2004
Late afternoon All,
Successfully installed Debian Sid (so far)
made the following changes this afternoon
added bluefish HTML editor
Updated the Kernel from 2.4.18bf24 to 2.4.24-1-k7-I & in the proccess seem to have
lost the eth0 connection so looked at /var/log/syslog discovered a few conflicts
(should be sorted) ie;
Feb 7 11:12:47 william kernel: PCI: PCI BIOS revision 2.10 entry at 0xf1970, last bus=1
Feb 7 11:12:47 william kernel: PCI: Using configuration type 1
Feb 7 11:12:47 william kernel: PCI: Probing PCI hardware
Feb 7 11:12:47 william kernel: PCI: ACPI tables contain no PCI IRQ routing entries
Feb 7 11:12:47 william kernel: PCI: Probing PCI hardware (bus 00)
Feb 7 11:12:47 william kernel: PCI: Using IRQ router VIA [1106/3227] at 00:11.0
Feb 7 11:12:47 william kernel: PCI: Found IRQ 3 for device 00:0f.1
Feb 7 11:12:47 william kernel: Irq routing conflict for 00:10.0, have irq 6, want irq 3
Feb 7 11:12:47 william kernel: Irq routing conflict for 00:10.1, have irq 6, want irq 3
Feb 7 11:12:47 william kernel: Linux NET4.0 for linux 2.4
.
.
Feb 7 11:12:47 william kernel: usb-uhci.c : High bandwith mode enabled
Feb 7 11:12:47 william kernel: PCI: Found IRQ# for device 00:10.0
Feb 7 11:12:47 william kernel: PCI: Sharing IRQ 3 with 00:0f.1
Feb 7 11:12:47 william kernel: IRQ routing conflict for 00:10.0, have irq 6, want irq 3
Feb 7 11:12:47 william kernel: IRQ routing conflict for 00:10.1, have irq 6, want irq 3
Feb 7 11:12:47 william kernel: usb-uhci.c USB UHC at I/O 0x8800, IRQ 6
.
.
Feb 7 11:12:47 william kernel: hub.c 2 ports detected
Feb 7 11:12:47 william kernel: PCI: Found IRQ 4 for device 00:10.3
Feb 7 11:12:47 william kernel: IRQ routing conflict for 00:10.0, have irq 9, want irq 4
Feb 7 11:12:47 william kernel: IRQ routing conflict for 00:10.2, have irq 9, want irq 4
Feb 7 11:12:47 william kernel: IRQ routing conflict for 00:10.3, have irq 6, want irq 4
.
.
How do we correct this as I am out of my depth, my knowledge is not up to this.
The eth0 question I remember but have misplaced the info please remind me as to how we
fixed this.
The new system is
AMD 2000+
m/board A7V600
512 MB memory
80G disk
Radeon 9200 video card
4KUS DVD-ROM
ethernet card
Thanks,
Laurie
More information about the plug
mailing list