[plug] [OT] GeForce 2mx fan issue

Ari Finander outrider at operamail.com
Thu Jun 3 05:38:50 WST 2004


----- Original Message -----
From: Michael Holland <myk at westnet.com.au>
Date: Wed, 2 Jun 2004 09:08:53 +0800 (WST)
To: plug at plug.linux.org.au
Subject: Re: [plug] [OT] GeForce 2mx fan issue

> On Wed, 2 Jun 2004, Ari Finander wrote:
> 
> > > Remove the fan from the board, open the plastic stopper (usually under
> > > the sticker) and drop a single drop of hobby oil (sewing machine oil is
> 
> > I've found that this solution generally doesn't last very long :-( I use
> > teflon particle bicycle chain oil.
> 
> Are you sure that is actually oil?  Dry lube with teflon is popular for
> bikes because it doesnt hold dirt, but its not such a good lube as oil.
> It is applied as a liquid, but the solvent/carrier evaporates.
> 

Netplus showed me that trick with the teflon oil. I should have known better, coming from their service department. I'll use sewing machine oil next time. Thanks for the tip.

> 
> _______________________________________________
> PLUG discussion list: plug at plug.linux.org.au
> http://mail.plug.linux.org.au/cgi-bin/mailman/listinfo/plug
> Committee e-mail: committee at plug.linux.org.au

-- 
_____________________________________________________________
Web-based SMS services available at http://www.operamail.com.
>From your mailbox to local or overseas cell phones.

Powered by Outblaze



More information about the plug mailing list