[plug] Help request

[Jon Miller]

I've finally got the Promise FastTrak SX4000 installed in Suse Standard server 8 to load up on boot up and now I need some help in getting the drives (3 x 120GB) to work.  What I have is a RAID5 configuration using the Promise utility now.  When the server boots it recognises the controller and the drives and the RAID 5.  Then Suse loads and recognises the controller card.  When I run cfdisk I see the 40GB WD drive that we use as a boot drive with about 6 partitions (hda1-hda7), cdrom, and floppy.  
I had a look on the web regarding setting up the SX4000 and all I see is the general setup of the controller card, nothing about getting the drives to show up.  Does anyone have any experience in the area. In other words what's next?

Thanks

Jon L. Miller, MCNE, CNS, ASE
Director/Sr Systems Consultant
MMT Networks Pty Ltd
http://www.mmtnetworks.com.au

"I don't know the key to success, but the key to failure
 is trying to please everybody." -Bill Cosby
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: TEXT.htm
URL: <http://lists.plug.org.au/pipermail/plug/attachments/20040309/118a1506/attachment.ksh>