[plug] Suse 9.2 2 nics

[doodli]

Can 2 nics work at the same time in a Suse setup??
Have 3 Computers and trying to get all talking but no go. Only one of 
the two nics seems to work. Is there a way to get both working at the 
same time?
Sweat has 2 nics 192.168.0.1 and 198.168.0.3 mask 255.255.255.0
Blood nic is 192.168.0.4 mask 255.255.255.0
Tears nic  is  192.168.0.2 mask 255.255.255.0    Has winxp but has no 
trouble see sweat when plugged in.

ifconfig gives
eth0      Link encap:Ethernet  HWaddr 00:00:1C:D8:C8:A6
          inet addr:192.168.0.3  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::200:1cff:fed8:c8a6/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:17298 errors:0 dropped:0 overruns:0 frame:0
          TX packets:15179 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:5201478 (4.9 Mb)  TX bytes:1749983 (1.6 Mb)
          Interrupt:10 Base address:0x6000

eth1      Link encap:Ethernet  HWaddr 00:0D:61:4B:3D:36
          inet addr:192.168.0.1  Bcast:192.168.0.255  Mask:255.255.255.0
          inet6 addr: fe80::20d:61ff:fe4b:3d36/64 Scope:Link
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 b)  TX bytes:296 (296.0 b)
          Interrupt:11 Base address:0x8000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:396 errors:0 dropped:0 overruns:0 frame:0
          TX packets:396 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:32710 (31.9 Kb)  TX bytes:32710 (31.9 Kb)

modem0    Link encap:Point-to-Point Protocol
          inet addr:220.235.54.90  P-t-P:202.72.191.162  
Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1464  Metric:1
          RX packets:126 errors:0 dropped:0 overruns:0 frame:0
          TX packets:133 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:59184 (57.7 Kb)  TX bytes:8600 (8.3 Kb)

netstat -rn gives
Kernel IP routing table
Destination     Gateway         Genmask         Flags   MSS Window  irtt 
Iface
202.72.191.162  0.0.0.0         255.255.255.255 UH        0 0          0 
modem0
192.168.0.0     0.0.0.0         255.255.255.0   U         0 0          0 
eth0
192.168.0.0     0.0.0.0         255.255.255.0   U         0 0          0 
eth1
169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 
eth0
127.0.0.0       0.0.0.0         255.0.0.0       U         0 0          0 lo
0.0.0.0         202.72.191.162  0.0.0.0         UG        0 0          0 
modem0

I know a switch would be easier but don't have one and want to try and 
get this working.
Can anyone help?