[plug] Bandwidth testing

[Mark B]

rrdtool
  ----- Original Message ----- 
  From: Carl Gherardi 
  To: plug at plug.org.au 
  Sent: Wednesday, September 14, 2005 5:19 PM
  Subject: [plug] Bandwidth testing


  Hey Guys,

  I'd like to test a link for maximum bandwidth before losing packets with udp.

  Ideally the output would look something like:
  Sending packets at 10Kb/s (5 seconds) - no packets lost, increasing rate
  Sending packets at 13Kb/s (5 seconds) - no packets lost, increasing rate
  Sending packets at 16Kb/s (5 seconds) - 2 packets lost, decreasing rate
  Sending packets at 14Kb/s ......

  What are people on the list using for bandwidth testing?

  Carl



------------------------------------------------------------------------------


  _______________________________________________
  PLUG discussion list: plug at plug.org.au
  http://www.plug.org.au/mailman/listinfo/plug
  Committee e-mail: committee at plug.linux.org.au

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.plug.org.au/pipermail/plug/attachments/20050914/b53c0888/attachment.html>