[plug] eth0 does not come up

[Jon Miller]

On a Suse 10 OS I cannot get the eth0 to come up.  I can see it when I issue lsmod as e100, but everything else I try does not bring up the interface.  Any ideals, this is on a IBM ThinkPad A22m.  I've tried both dhcp and hard coded the ip address and it is set to startup on boot, etc.

Thanks
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: TEXT.htm
URL: <http://lists.plug.org.au/pipermail/plug/attachments/20061205/89e85d2c/attachment.ksh>