[plug] AS/400 and Linux

[Richard Meyer]

On Tue, 2006-01-10 at 14:28 +1100, Jeremy Kerr wrote:
> Peter,
> 
> > we were about to create a secondary partition however we
> > could not find any spare resources to allocate to the secondary
> > partition for some strange reason.
> >
> > Idea's anyone?
> 
> When you were adjusting the resources, there would have been min, max 
> and current values for each resource. If you adjusted the current value 
> with the [min,max] range, then you only need to vary on & off the 
> appropriate partition for the change to take effect.
> 
> However, it sounds like you may have adjusted the current value outside 
> the minimum or maximum. In this case (maybe not for CPU resources 
> though, I'm not sure) you'll probably need to IPL the entire machine 
> for the resource(s) to be reallocated.
> 
> It's been a while since I've dealt with this on an iSeries though!

My experience is all from the predecessors of the zSeries, so I can't
help too much, but what Jeremy says sounds right.
> 
> Hope this helps.
> 
> 
> Jeremy

-- 
Richard Meyer <meyerri at westnet.com.au>