[plug] error message in /var/log/message

[Jon Miller]

Thanks for the insight, however the system is very clean all fins/fans are good.  What I've noticed when I reboot is the same error when it was booting up. This happens after loading the Promise Fasttrack S150 TX2plus SATA controller.  I think its the controller gone south of the border.
Problem is trying to find a replacement since this is a RAID1 card with 2 HDDs.
I'm told by the vendor that I can use the next generation Raid card from Promise and it should work without any issues.

Jon

Jon L. Miller,  ASE, CNS, CLS, MCNE, CCNA
Director/Sr Systems Consultant
MMT Networks Pty Ltd
http://www.mmtnetworks.com.au
Resellers for: Novell Gold Partner, Cisco Partner, Peopletelecom, Westnet, Sophos Anti-Virus, CA Products

"I don't know the key to success, but the key to failure
 is trying to please everybody." -Bill Cosby



>>> billk at iinet.net.au 9:54:13 am 9/03/2006 >>>
CPU overheating during high usage? Clean the filters/fans/fins, check
enviro temp. (tar is mentioned, maybe maxed out compressing something?)


BillK

On Thu, 2006-03-09 at 09:47 +0800, Jon Miller wrote:
> Like to know if someone can explain what the following messages mean:
> 
> Mar  9 09:29:16 gw kernel: Code:  Bad EIP value.
> Mar  9 09:29:27 gw kernel:  <1>Unable to handle kernel paging request at virtual address 04e8c358
> Mar  9 09:29:27 gw kernel:  printing eip:
> Mar  9 09:29:27 gw kernel: 04e8c358
> Mar  9 09:29:27 gw kernel: Oops: 0000
> Mar  9 09:29:27 gw kernel: CPU:    0
> Mar  9 09:29:27 gw kernel: EIP:    0010:[agp_frontend_cleanup+82363224/-1072693248]    Not tainted
> Mar  9 09:29:27 gw kernel: EFLAGS: 00010293
> Mar  9 09:29:27 gw kernel: eax: 00000109   ebx: e7e90000   ecx: 0806885c   edx: 00000018
> Mar  9 09:29:27 gw kernel: esi: 00000016   edi: ffffffff   ebp: bffff998   esp: e7e91fc0
> Mar  9 09:29:27 gw kernel: ds: 0018   es: 0018   ss: 0018
> Mar  9 09:29:27 gw kernel: Process tar (pid: 10184, stackpage=e7e91000)
> Mar  9 09:29:27 gw kernel: Stack: c0108913 00000000 0806885c 400222b4 00000016 ffffffff bffff998 00000109
> Mar  9 09:29:27 gw kernel:        0000002b 0000002b 00000109 4001eea6 00000023 00000246 bffff97c 0000002b
> Mar  9 09:29:27 gw kernel: Call Trace:    [system_call+51/56]
> 
> 
> Client told me the server was not responding when he came in and therefore he rebooted (turned off the server).
> 
> 
> Thanks
> 
> 
> Jon L. Miller,  ASE, CNS, CLS, MCNE, CCNA
> Director/Sr Systems Consultant
> MMT Networks Pty Ltd
> http://www.mmtnetworks.com.au
> Resellers for: Novell Gold Partner, Cisco Partner, Peopletelecom, Westnet, Sophos Anti-Virus, CA Products
> 
> "I don't know the key to success, but the key to failure
>  is trying to please everybody." -Bill Cosby
> _______________________________________________
> PLUG discussion list: plug at plug.org.au
> http://www.plug.org.au/mailman/listinfo/plug
> Committee e-mail: committee at plug.linux.org.au
_______________________________________________
PLUG discussion list: plug at plug.org.au
http://www.plug.org.au/mailman/listinfo/plug
Committee e-mail: committee at plug.linux.org.au
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.plug.org.au/pipermail/plug/attachments/20060310/bee11300/attachment.htm>