[plug] iptables questions

[Fred Janon]

The server has another IP from the WAN that I am using to test.

Thanks

Fred

--- On Wed, 9/29/10, Daniel Pittman <daniel at rimspace.net> wrote:

From: Daniel Pittman <daniel at rimspace.net>
Subject: Re: [plug] iptables questions
To: plug at plug.org.au
Date: Wednesday, September 29, 2010, 5:02 PM

Fred Janon <fjanon at yahoo.com> writes:

> I am trying to understand how iptables work.

[...]

> After some research, I did this to try to enable PINGs. The server IP is
> 10.161.82.237

[...]

> The tracert or ping still time out.

...er, and just to check: you *are* doing your testing from the same local
network as the server, not trying to reach it over the Internet, right?

I ask, because the 10/8 range is a "private use" allocation, and isn't going
to be routed by your ISP or anything.

        Daniel
-- 
✣ Daniel Pittman            ✉ daniel at rimspace.net            ☎ +61 401 155 707
               ♽ made with 100 percent post-consumer electrons
_______________________________________________
PLUG discussion list: plug at plug.org.au
http://www.plug.org.au/mailman/listinfo/plug
Committee e-mail: committee at plug.linux.org.au
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.plug.org.au/pipermail/plug/attachments/20100929/96fe09ca/attachment.html>