No subject
Tue Nov 29 10:43:08 WST 2011
windows partition I'm wondering if the mandrake installation didn't do
this to some extent. However, the windows partition mounts fine now.
>....do you mean you were trying to mount the windows partition? I
assume you
>were - however, the error you describe would make me think there's
>something corrupt either in your windows partition or in the hard
disk
>partitioning.
>
me too, see above
>I'm beginning to suspect you may have made a mistake in partitioning
the
>disk (and so royally f*cked things up) when you installed Mandrake.
>I hope I'm wrong :).
I suspect you're right to an extent, but I'm not sure, as RH is now
booting properly again and windows is mountable again. Perhaps
playing with starting up fips with a boot disk somehow helped matters?
Could fips have auto-corrected the wrong number sin the partition
table?
>So let me get this straight.... Mandrake appears to be okay then?
>
>Can you still boot into Windows okay?
>
Yes to both of the above questions. Now that I've reactivated RH lilo
I need to properly set it up to boot mandrake...any tips on how not to
bollocks it up like I did with setting up mandrake's lilo? :-)
Thanks again,
Ari
__________________________________________________________________
Get your free Australian email account at http://www.start.com.au
------=_NextPart_000_86151811
Content-Type: text/plain; name="demsg-output.txt"
Content-Transfer-Encoding: Quoted-Printable
Content-Disposition: attachment; filename="demsg-output.txt"
Linux version 2=2E2=2E17-21mdk (chmou at no=2Emandrakesoft=2Ecom) (gcc=
version 2=2E95=2E3 19991030 (prerelease)) #1 Thu Oct 5 13:16:08 CEST=
2000
Detected 400915 kHz processor=2E
Console: colour VGA+ 80x25
Calibrating delay loop=2E=2E=2E 799=2E54 BogoMIPS
Memory: 127612k/131008k available (1136k kernel code, 412k=
reserved, 1720k data, 128k init, 0k bigmem)
Dentry hash table entries: 16384 (order 5, 128k)
Buffer cache hash table entries: 131072 (order 7, 512k)
Page cache hash table entries: 32768 (order 5, 128k)
VFS: Diskquotas version dquot_6=2E4=2E0 initialized
Intel machine check architecture supported=2E
Intel machine check reporting enabled on CPU#0=2E
CPU: Intel Celeron (Mendocino) stepping 05
Checking 386/387 coupling=2E=2E=2E OK, FPU using exception 16 error=
reporting=2E
Checking 'hlt' instruction=2E=2E=2E OK=2E
POSIX conformance testing by UNIFIX
mtrr: v1=2E35a (19990819) Richard Gooch (rgooch at atnf=2Ecsiro=2Eau)
PCI: PCI BIOS revision 2=2E10 entry at 0xfb430, last bus=3D1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4=2E0 for Linux 2=2E2
Based upon Swansea University Computer Society NET3=2E039
NET4: Unix domain sockets 1=2E0 for Linux NET4=2E0=2E
NET4: Linux TCP/IP 1=2E0 for NET4=2E0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 131072 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1=2E5
Detected PS/2 Mouse Port=2E
Serial driver version 4=2E27 with MANY_PORTS MULTIPORT SHARE_IRQ=
enabled
ttyS00 at 0x03f8 (irq =3D 4) is a 16550A
ttyS01 at 0x02f8 (irq =3D 3) is a 16550A
pty: 256 Unix98 ptys configured
apm: BIOS version 1=2E2 Flags 0x07 (Driver version 1=2E13)
Real Time Clock Driver v1=2E09
RAM disk driver initialized: 16 RAM disks of 4096K size
Uniform Multi-Platform E-IDE driver Revision: 6=2E30
ide: Assuming 33MHz system bus speed for PIO modes; override with=
idebus=3Dxx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:pio,=
hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio,=
hdd:pio
hda: Maxtor 51536H2, ATA DISK drive
hdc: CD-ROM 40X/AKU, ATAPI CDROM drive
hdd: 8X4X32, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: Maxtor 51536H2, 14655MB w/2048kB Cache, CHS=3D1868/255/63
hdc: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3=2E11
hdd: ATAPI 32X CD-ROM CD-R/RW drive, 8192kB Cache
Floppy drive(s): fd0 is 1=2E44M
FDC 0 is a post-1991 82077
md driver 0=2E90=2E0 MAX_MD_DEVS=3D256, MAX_REAL=3D12
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 906=2E018 MB/sec
p5_mmx : 923=2E163 MB/sec
8regs : 695=2E706 MB/sec
32regs : 410=2E337 MB/sec
using fastest function: p5_mmx (923=2E163 MB/sec)
scsi : 0 hosts=2E
scsi : detected total=2E
md=2Ec: sizeof(mdp_super_t) =3D 4096
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 >
autodetecting RAID arrays
autorun =2E=2E=2E
=2E=2E=2E autorun DONE=2E
VFS: Mounted root (ext2 filesystem) readonly=2E
Freeing unused kernel memory: 128k freed
Adding Swap: 136512k swap-space (priority -1)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)
VFS: Disk change detected on device ide1(22,0)
VFS: Disk change detected on device ide1(22,64)=0A
------=_NextPart_000_86151811--
More information about the plug
mailing list