[plug] Camera to computer

[Leon Wright]

Hi Laurie,

Software like shotwell is available in most Distros. But if it's a card
reader and some type of card you should be able to just plug it in, then
Copy and Paste the files as you normally would. Some cameras probably "Just
Work" when you plug them in, but YMMV depending on brand.

Probably list out what equipment you do have, but if you don't have a Card
reader I recommend getting one (usually faster than going via the camera).

Leon

--
DRM 'manages access' in the same way that jail 'manages freedom.'

# cat /dev/mem | strings | grep -i cats
Damn, my RAM is full of cats... MEOW!!


On Sun, Aug 3, 2014 at 11:20 AM, lranderson <lan89295 at bigpond.net.au> wrote:

>
>
>      Hello one & all,
>
>      This is my first venture into transferring shots from camera to a
>      computer.
>
>      Have all the necessary hardware connections but have no idea
>      what comes next ie: any additional software required or the
>      steps needed to make the transfer happen.
>
>      Hope someone can help.
>
>      Thanks
>
>      Laurie
> _______________________________________________
> PLUG discussion list: plug at plug.org.au
> http://lists.plug.org.au/mailman/listinfo/plug
> Committee e-mail: committee at plug.org.au
> PLUG Membership: http://www.plug.org.au/membership
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.plug.org.au/pipermail/plug/attachments/20140807/3488594a/attachment.html>