[plug] Camera to computer
simonzwise at gmail.com
Fri Aug 8 10:39:34 UTC 2014
On 07/08/14 10:34, Leon Wright wrote:
> Hi Laurie,
> Software like shotwell is available in most Distros. But if it's a card
> reader and some type of card you should be able to just plug it in, then
> Copy and Paste the files as you normally would. Some cameras probably "Just
> Work" when you plug them in, but YMMV depending on brand.
> Probably list out what equipment you do have, but if you don't have a Card
> reader I recommend getting one (usually faster than going via the camera).
there are nice little USB stick devices by Sandisk that take microSD cards, so
your microSD becomes a typical USB stick
> DRM 'manages access' in the same way that jail 'manages freedom.'
> # cat /dev/mem | strings | grep -i cats
> Damn, my RAM is full of cats... MEOW!!
> On Sun, Aug 3, 2014 at 11:20 AM, lranderson<lan89295 at bigpond.net.au> wrote:
>> Hello one& all,
>> This is my first venture into transferring shots from camera to a
>> Have all the necessary hardware connections but have no idea
>> what comes next ie: any additional software required or the
>> steps needed to make the transfer happen.
sometimes bluetooth is the simplest, if you have bluetooth on each device of
course. File transfer isn't very fast, but is very easy to initiate without any
>> Hope someone can help.
>> PLUG discussion list: plug at plug.org.au
>> Committee e-mail: committee at plug.org.au
>> PLUG Membership: http://www.plug.org.au/membership
> PLUG discussion list: plug at plug.org.au
> Committee e-mail: committee at plug.org.au
> PLUG Membership: http://www.plug.org.au/membership
More information about the plug