[PLUG-AV] Video problems last night

[Jason Nicholls]

Hey James,

At the end of the talk Nick and I played around getting one of the cameras
to work on the laptop which the twinpac was connected to because we knew
that worked. Initially we had the same problem but then it became evident
the issue was the cable where it plugs into the camera, it was partially
coming out due to the weight of the cable itself and that was messing up
the fw signal. I managed to get it working by holding it in place then it'd
break when I let it go.

I don't know about the other camera if that was a similar problem. So we
definitely need to test this again and perhaps rig up something to help the
plugs from partially or completely coming out.

FYI i'm uploading the video atm, should be there in ~30mins


On Wed, May 2, 2012 at 11:28 AM, James Bromberger <james at rcpt.to> wrote:

>  DVgrab is the same on all three ingest workstations
> DVsource is updated on two av1-2 and 1-3: they are running 0.8.3.6-1+b2.
> av1-1 is on 0.8.3.6-1+b1.
>
> The one change between the two versions is:
> *Rebuilt against boost 1.49.*
>
> But... we had this issue on Euan's laptop, and Nicks laptop, and Av2...
> not just the two ingest workstations.....
>
> Also, new Av2 box (for running DVswitch) now due in tomorrow.
>
>   James
> --
> *Mobile:* +61 422 166 708, *Email:* james_AT_rcpt.to
> PLUG President 2012: http://www.plug.org.au <http://http/www.plug.org.au>
>
> _______________________________________________
> AV mailing list
> AV at plug.org.au
> http://lists.plug.org.au/mailman/listinfo/av
>
>


-- 
Jason Nicholls
jason at mindsocket.com.au
0430 314 857
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.plug.org.au/pipermail/av/attachments/20120502/e47b403b/attachment.html>