[PLUG-AV] Fwd: Video problems last night

[Jason Nicholls]

I was thinking of a piece of string or thin shoelace, it's tied at it's
midpoint to the plug then you wrap it around the camera with a shoelace
type knot on the opposite side of the camera. Simple but it should keep the
plug in.



On Wed, May 2, 2012 at 8:10 PM, Leon Wright <techman83 at gmail.com> wrote:

> On Wed, May 2, 2012 at 3:21 PM, James Bromberger <james at rcpt.to> wrote:
> > So in digging through, it seems that the /dev/raw1394 device is no longer
> > present; this device is from the raw1394 module, which is part of the
> "old"
> > firewire stack, not the new "juju" stack. Doing an strace on
> > dvsource-firewire sees it try to access /dev/raw1394, so I suspect that
> the
> > old stack has been pulled, and dvsource doesn't support the new stack.
> I'll
> > find out....
>
> My research found similar results last night. My debian fu isn't as
> sharp, so I wasn't able to really get a solution at the time.
>
> I was thinking that we could glue a direction changer in the port or
> something. Also for the new gear maybe some type of cable clamp to
> take the bulk of the weight, rather than the camera port. I'd say the
> connectors aren't really designed for the way we are using them. (more
> for sitting on the desk next to the computer in post recording).
>
> Leon
> _______________________________________________
> AV mailing list
> AV at plug.org.au
> http://lists.plug.org.au/mailman/listinfo/av
>



-- 
Jason Nicholls
jason at mindsocket.com.au
0430 314 857
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.plug.org.au/pipermail/av/attachments/20120502/d4e61b3a/attachment.html>