[plug] Xwindows config problem
Chris Griffin
chrisg at doladns.dola.wa.gov.au
Mon Oct 18 14:24:40 WST 1999
What no takers on this?
I also found another problem over the weekend when trying to install RH 6.1
on my system at home.
Seems RH have removed SCSI support from their setup options at install
time. Bit of a problem when you have SCSI drives that do not get seen at all.
Any takers at all?
Regards,
Chris
At 14:28 15/10/1999 +0800, you wrote:
>I have an old Osborne P90 I have just installed RH6.0 onto to set it up as
>our secondary DNS (and a few other things).
>It has an onboard, Matrox, video controller which is faulty, has been
>disabled and a Diamond Stealth 64 card installed.
>Trouble is when RH6.0 gets to the point of trying to configure XWindows,
>it keeps finding the Matrox card and NOT the Diamond. It does not do this
>with RH 5.2 and I have re-checked the jumpers to ensure it is disabled.
>Any ideas how I can get around this?
>
>Regards,
>Chris
>
> \\\___///
> \\ - - //
> ( @ @ )
>+----------------------------oOOo-(_)-oOOo--------------+
>| Chris Griffin, Senior Network Engineer |
>| Email: chris.griffin at mitswa.com.au |
>| Managed Information Technology Solutions (M.I.T.S) |
>| 1st Floor, Batholomew House, 31 Ventnor Avenue, |
>| West Perth W.A. 6005 |
>| PH: +61 (08) 9481-4066 FAX: +61 (08) 9481-4064 |
>+-----------------------------------Oooo----------------+
>I haven't lost my mind - oooO ( )
>- it's backed up on tape ( ) ) /
> somewhere. \ ( (_/
> \_)
\\\___///
\\ - - //
( @ @ )
+----------------------------oOOo-(_)-oOOo--------------+
| Chris Griffin, Senior Network Engineer |
| Email: chris.griffin at mitswa.com.au |
| Managed Information Technology Solutions (M.I.T.S) |
| 1st Floor, Batholomew House, 31 Ventnor Avenue, |
| West Perth W.A. 6005 |
| PH: +61 (08) 9481-4066 FAX: +61 (08) 9481-4064 |
+-----------------------------------Oooo----------------+
I haven't lost my mind - oooO ( )
- it's backed up on tape ( ) ) /
somewhere. \ ( (_/
\_)
More information about the plug
mailing list