[plug] PPP Connection having problems

Marshall, Joshua marshallj at switch.aust.com
Wed Nov 22 13:30:07 WST 2000


> Make sure that the RTS/CTS (pins 4&5 on 25-pin RS-232) are wired through (ie
> RTS-end-1 to CTS-end-2 and vice versa) and that pppd's ``crtscts'' option is
> enabled.

I've looped-back the RTS and CTS rather than running them through the cable,
because the cable is only 3 wires.

> Use the pppd option ``asyncmap 0'' if you're a speed hog. With PCI serial cards
> at each end and either the new serial driver or a 2.4 kernel, you can expect
> around 300Kb/s, which is approaching Ethernet speeds. Running pppd in synchronous
> mode yields about another 20%.

I'll give that a go. I assume I have to add that at each end.

> Wiring DTR-end-1 to CD-end-2 and vice versa is also good for causing a mutual
> ``hangup'' signal if the cable is unplugged.

I've been using a lcp ping to hangup at each end, seems to work well, since I don't
have a cable with enough cores.

Josh.




More information about the plug mailing list