[plug] Problem with Tekram scsi driver

[Phil Steege]

Richard,

Here is the output from "cat /proc/pci"  I could not find the ispci program 
on my RH7.1 distro.  As you can see, the Tekram is PCI and shown on the 
bottom.

Phil

[root at firewall pappo]# cat /proc/pci
PCI devices found:
  Bus  0, device   0, function  0:
    Host bridge: Intel Corporation 430TX - 82439TX MTXC (rev 1).
      Master Capable.  Latency=64.
  Bus  0, device   7, function  0:
    ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 1).
  Bus  0, device   7, function  1:
    IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 1).
      Master Capable.  Latency=64.
      I/O at 0xf000 [0xf00f].
  Bus  0, device   7, function  2:
    USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 1).
      Master Capable.  Latency=64.
      I/O at 0x6400 [0x641f].
  Bus  0, device   7, function  3:
    Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 1).
      IRQ 9.
  Bus  0, device   9, function  0:
    Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 (rev 16).
      IRQ 9.
      Master Capable.  Latency=64.  Min Gnt=32.Max Lat=64.
      I/O at 0x6800 [0x68ff].
      Non-prefetchable 32 bit memory at 0xe1000000 [0xe10000ff].
  Bus  0, device  10, function  0:
    VGA compatible controller: ATI Technologies Inc 3D Rage Pro 215GP (rev 
92).
      IRQ 11.
      Master Capable.  Latency=64.  Min Gnt=8.
      Prefetchable 32 bit memory at 0xe0000000 [0xe0ffffff].
      I/O at 0x6c00 [0x6cff].
      Non-prefetchable 32 bit memory at 0xe1001000 [0xe1001fff].
  Bus  0, device  12, function  0:
    SCSI storage controller: Tekram Technology Co.,Ltd. TRM-S1040 (rev 1).
      IRQ 10.
      Master Capable.  Latency=64.
      I/O at 0x7000 [0x70ff].
      Non-prefetchable 32 bit memory at 0xe1002000 [0xe1002fff].On Saturday 



16 June 2001 12:03 pm, Richard Sharpe wrote:
> At 05:16 PM 6/15/01 +1000, Phil Steege wrote:
> >Ok, here is what I got back from the modinfo command:
> >[root at localhost AddsBooks]# /sbin/modinfo -p
> >/lib/modules/2.4.2-2/kernel/drivers/scsi/tmscsim.o
> >tmscsim int array (min = 1, max = 6), description "Host SCSI ID, Speed
> >(0=10MHz), Device Flags, Adapter Flags, Max Tags (log2(tags)-1),
> > DelayReset (s)"
> >
> >Which part of this do I use ?
>
> Hmmm, is the TekRam adapter a PCI adapter? You generally don't have to
> specify the IRQ number for PCI adapters ...
>
> What does 'lspci' show? You can also do 'lspci -v' or 'cat /proc/pci' to
> get lots of info about what the kernel found on the PCI bus.
>
> The error message suggests that the driver could not find the card. Is your
> BIOS correctly set up to allow the PCI cards to find an IRQ? Do you,
> perchance, have all IRQs set to legacy (and thus for ISA)?
>
> >Phil
>
> Regards
> -------
> Richard Sharpe, sharpe at ns.aus.com
> Samba (Team member, www.samba.org), Ethereal (Team member,
> www.ethereal.com) Contributing author, SAMS Teach Yourself Samba in 24
> Hours
> Author, Special Edition, Using Samba