[plug] PCI Modem troubleshooting

[Brad Campbell]

Luke Dudney wrote:
> 

> If you have no luck talking to the modem this way, you might need to set 
> the serial port parameters.
> Get the IRQ and IO from the output of 'cat /proc/pci' and do something 
> like this:
> 
> # /bin/setserial /dev/ttyS1 port 0x2c00 irq 10 uart 16550A
> 

Check dmesg and make sure the serial driver actually picked up an extra 
com port. It will also tell you what it is.
No listing the in the dmesg, no workee..

-- 
Brad....
  /"\
  \ /     ASCII RIBBON CAMPAIGN
   X      AGAINST HTML MAIL
  / \