[plug] re: routing issue

[Jon Miller]

Just a quickie, for some reason one (1) of my locations has ceased operating as before.
I cannot ping the other end.  I have a VPN from the office to the home and from the office to clients site. This is all done using cipe on RHL7.2 servers.  The infrastructure is using xdsl links with Cisco routers.

home 192.168.10.3 (thru cipcb1)<----->ofc 192.168.10.1 (cipcb0) <―---->client 192.168.10.2(cipcb0)

hm = 192.168.5.0   ext-ip 203.153.229.85
ofc = 192.168.1.0   ext-ip 203.153.229.84
site = 192.168.0.0  ext-ip 203.153.229.86

Routing table from ofc
Kernel IP routing table
Destination     Gateway           Genmask           Flags Metric Ref    Use  Iface
192.168.10.3    0.0.0.0            255.255.255.255  UH     0         0        0   cipcb1
192.168.10.2    0.0.0.0            255.255.255.255  UH     0         0        0   cipcb0
192.168.3.0      0.0.0.0            255.255.255.0     U        0        0        0    eth1
192.168.1.0      0.0.0.0            255.255.255.0     U        0        0        0    eth0
192.168.0.0     192.168.10.2    255.255.255.0     UG     0         0        0    cipcb0
127.0.0.0         0.0.0.0            255.0.0.0            U        0         0        0    lo
0.0.0.0            192.168.3.254   0.0.0.0              UG      0         0        0    eth1

Can anyone point out any problem?

Jon L. Miller, MCNE, CNS
Director/Sr Systems Consultant
MMT Networks Pty Ltd
http://www.mmtnetworks.com.au

"I don't know the key to success, but the key to failure
 is trying to please everybody." -Bill Cosby