[plug] ADSL - filters/splitters

[Senectus .]

I think what your after is an "inline filter"
You have one at a paticular point on the pair comming into your
house.. and thats it..

On Tue, 22 Jun 2004 23:23:18 +1000, Martin <marty at supine.com> wrote:
> 
> $quoted_author = "Arie Hol" ;
> >
> > Can any body give me an indication of the best/cheapest way of
> > installing a hard wired solution rather then using "plug-in type"
> > filters/splitters ?
> >
> > I would need too many of the plug-in type, which I'm told will degrade
> > the quality of the service.
> 
> ?
> what situation do you have that would require too many of the plugin
> filters?
> 
> you normally need one filter per phone handset.
> 
> here i have a central filter so a handset can be plugged into any phone
> outlet without needing it's own filter. ie. telstra copper comes in to
> wiring closet and a distribution block. two cables come off this block,
> one goes to the adsl modem unfiltered, the other is filtered and goes to
> a second distribution block from which comes all the wiring for phone
> outlets.
> 
> marty
> 
> --
> You get 10 points for difficulty,
> but for execution you get minus three.
> 
> "Holding On" - Lazy Susan
> 
> 
> _______________________________________________
> PLUG discussion list: plug at plug.linux.org.au
> http://mail.plug.linux.org.au/cgi-bin/mailman/listinfo/plug
> Committee e-mail: committee at plug.linux.org.au
> 


-- 
Attacking Linus' integrity and character is like clubbing baby seals. 
- PJ, Groklaw.net