[plug] ADSL good news/ DEFault gateway

David davidatt at conceptual.net.au
Wed Dec 28 05:13:39 WST 2005


Hi

thank you i will take a look at this when i get back home today later on.

i will see what will happen from here. have eavy one have look at this yet
the gw is 172.29.29.192 that is right..

message to dan i will be home after lunch time today. if you are comming 
a round please ring me be for you come please..

see you all later

david


Jon Miller wrote:
> David are you saying your default gw is 172.29.29.192? so that we are on the same page, is this the ip address on your internal connection (e.g the one connection that all internal PC connect to or the external connection (connection that is on the Internet)?
> If it's internal then all your internal pc's must be in the range of addresses dictated by the subnet mask (this determines how many hosts you can use and what your network and broadcast address is. Knowing this lets you know which one to use for a gateway and the other for the PC. 
> Example is as follows:
> Let's say you have 1 PC and the router/modem, the ISP issued you a block of addresses with a network of 172.29.29.192/30
> Which this it means you can use 172.29.29.193 and 172.29.29.194 with a broadcast address of 172.29.29.195. 
> So you would assign your gateway either .193 or .194 and the PC with the other.
> /30 dictates how many hosts you can have (in this case 2 hosts).  
> So what you need to do is let us know what subnet mask and or network address you are working with. From my calculations .192 is a network address not to be used for hosts or gateway. If this is the case what is the subnet mask?
> 
> JLM
> 
> 
>>>>davidatt at conceptual.net.au 10:40:18 pm 26/12/2005 >>>
> 
> hi jonathan,
> 
> the gateway default start with 172.29.29.192 this one dose not line up 
> with the one i have in my computer at all.
> 
> i did have the web site come looking up then stop ok..
> 
> david
> 
> 
> Jonathan Young wrote:
> 
>>Hi Shayne:  This one has quite a bit of history / discussion on PLUG, 
>>but it's under different subject lines.
>>
>>Hi David:  Your modem is on 192.168.1.1 according to previous emails.  
>>Your computer should be using 192.168.1.xxx, with the default gateway 
>>being the address of the MODEM i.e. 192.168.1.1 - this is determined by 
>>the configuration of your modem, not your computer.
>>
>>
>>Mr Shayne wrote:
>>
>>
>>>Try IP: 192.168.0.xxx,  gateway 192.168.0.1
>>>failing that,
>>>IP: 10.0.0.xx, gateway10.0.0.1
>>>
>>>Generally speaking however DHCP should cover it all, unless theres an 
>>>XP machine throwing bogon  packets into the network.
>>>
>>>-- 
>>>Freedom's just another word for something new to regulate
>>>
>>>On Mon, 26 Dec 2005, David wrote:
>>>
>>>
>>>>Hi Guys,
>>>>
>>>>i hope you can help me out here. i need my computers Default gateway 
>>>>ip address that i can put in to my ADSL Modem.
>>>>
>>>>the one in the modem dose not line up with the one in my computer at 
>>>>all  can some one help me out how to get it out of my computer please.
>>>>
>>>>
>>>>                                          DHCP
>>>>the good news is on my ADSL modem i have a DHCPoffer back
>>>>                                          DHCPACE
>>>>in 1800 sec update
>>>>
>>>>i need a IP ADDRESS FOR DEFAULT GATEWAY.. I NEED TO GET IT OUT OF MY 
>>>>COMPUTER.
>>>>
>>>>I AM RUNING SYSTEM IS DEBIAN SARGE
>>>>
>>>>I NEED THIS TO GET ON TO ADSL PLEASE
>>>>
>>>>YOURS SINCELY
>>>>
>>>>DAVID
>>>>_______________________________________________
>>>>PLUG discussion list: plug at plug.org.au
>>>>http://www.plug.org.au/mailman/listinfo/plug
>>>>Committee e-mail: committee at plug.linux.org.au
>>>>
>>>
>>>_______________________________________________
>>>PLUG discussion list: plug at plug.org.au
>>>http://www.plug.org.au/mailman/listinfo/plug
>>>Committee e-mail: committee at plug.linux.org.au
>>>
>>
>>
> 
> _______________________________________________
> PLUG discussion list: plug at plug.org.au
> http://www.plug.org.au/mailman/listinfo/plug
> Committee e-mail: committee at plug.linux.org.au
> 
> 
> ------------------------------------------------------------------------
> 
> David are you saying your default gw is 172.29.29.192? so that we are on 
> the same page, is this the ip address on your internal connection (e.g 
> the one connection that all internal PC connect to or the external 
> connection (connection that is on the Internet)?
> If it's internal then all your internal pc's must be in the range of 
> addresses dictated by the subnet mask (this determines how many hosts 
> you can use and what your network and broadcast address is. Knowing this 
> lets you know which one to use for a gateway and the other for the PC.
> Example is as follows:
> Let's say you have 1 PC and the router/modem, the ISP issued you a block 
> of addresses with a network of 172.29.29.192/30
> Which this it means you can use 172.29.29.193 and 172.29.29.194 with a 
> broadcast address of 172.29.29.195.
> So you would assign your gateway either .193 or .194 and the PC with the 
> other.
> /30 dictates how many hosts you can have (in this case 2 hosts). 
> So what you need to do is let us know what subnet mask and or network 
> address you are working with. From my calculations .192 is a network 
> address not to be used for hosts or gateway. If this is the case what is 
> the subnet mask?
>  
> JLM
> 
>  >>> davidatt at conceptual.net.au 10:40:18 pm 26/12/2005 >>>
> hi jonathan,
> 
> the gateway default start with 172.29.29.192 this one dose not line up
> with the one i have in my computer at all.
> 
> i did have the web site come looking up then stop ok..
> 
> david
> 
> 
> Jonathan Young wrote:
>  > Hi Shayne:  This one has quite a bit of history / discussion on PLUG,
>  > but it's under different subject lines.
>  >
>  > Hi David:  Your modem is on 192.168.1.1 according to previous emails. 
>  > Your computer should be using 192.168.1.xxx, with the default gateway
>  > being the address of the MODEM i.e. 192.168.1.1 - this is determined by
>  > the configuration of your modem, not your computer.
>  >
>  >
>  > Mr Shayne wrote:
>  >
>  >>
>  >> Try IP: 192.168.0.xxx,  gateway 192.168.0.1
>  >> failing that,
>  >> IP: 10.0.0.xx, gateway10.0.0.1
>  >>
>  >> Generally speaking however DHCP should cover it all, unless theres an
>  >> XP machine throwing bogon  packets into the network.
>  >>
>  >> --
>  >> Freedom's just another word for something new to regulate
>  >>
>  >> On Mon, 26 Dec 2005, David wrote:
>  >>
>  >>> Hi Guys,
>  >>>
>  >>> i hope you can help me out here. i need my computers Default gateway
>  >>> ip address that i can put in to my ADSL Modem.
>  >>>
>  >>> the one in the modem dose not line up with the one in my computer at
>  >>> all  can some one help me out how to get it out of my computer please.
>  >>>
>  >>>
>  >>>                                           DHCP
>  >>> the good news is on my ADSL modem i have a DHCPoffer back
>  >>>                                           DHCPACE
>  >>> in 1800 sec update
>  >>>
>  >>> i need a IP ADDRESS FOR DEFAULT GATEWAY.. I NEED TO GET IT OUT OF MY
>  >>> COMPUTER.
>  >>>
>  >>> I AM RUNING SYSTEM IS DEBIAN SARGE
>  >>>
>  >>> I NEED THIS TO GET ON TO ADSL PLEASE
>  >>>
>  >>> YOURS SINCELY
>  >>>
>  >>> DAVID
>  >>> _______________________________________________
>  >>> PLUG discussion list: plug at plug.org.au
>  >>> http://www.plug.org.au/mailman/listinfo/plug
>  >>> Committee e-mail: committee at plug.linux.org.au
>  >>>
>  >> _______________________________________________
>  >> PLUG discussion list: plug at plug.org.au
>  >> http://www.plug.org.au/mailman/listinfo/plug
>  >> Committee e-mail: committee at plug.linux.org.au
>  >>
>  >
>  >
> 
> _______________________________________________
> PLUG discussion list: plug at plug.org.au
> http://www.plug.org.au/mailman/listinfo/plug
> Committee e-mail: committee at plug.linux.org.au
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> PLUG discussion list: plug at plug.org.au
> http://www.plug.org.au/mailman/listinfo/plug
> Committee e-mail: committee at plug.linux.org.au




More information about the plug mailing list