[plug] DSL Lines

[Chris Watt]

a better option would be the splitting to ip ranges.  one dedicated to
the webserver, one dedicated to the phone room and one dedicated to
the other pghone system  is that doable?




On 7/13/05, Shannon Carver <Shannon.Carver at p-s-t.com.au> wrote:
> It's not possible with the ADSL1 standard to physically "bond" the lines together to make one pipe, I believe.  You can take steps to try and do the same thing with a load balancing router/Linux EQL.
> 
> I was reading a spec sheet on ADSL2/2+ recently (Linked from Whirlpool I think), which stated that one of the many advantages with ADSL2/2+ was the ability to bond lines into one.
> 
> Please corrent me if I'm wrong :P
> 
> Shannon
> 
> -----Original Message-----
> From: plug-bounces at plug.org.au [mailto:plug-bounces at plug.org.au] On Behalf Of Onno Benschop
> Sent: Wednesday, 13 July 2005 3:05 PM
> To: plug at plug.org.au
> Subject: Re: [plug] DSL Lines
> 
> Chris Watt wrote:
> 
> >Is it possible to run multiple DSL lines into a single piece of
> >hardware that will make the server act as though the line is one big
> >line?
> >
> I suspect that multilink-ppp is an option, or load balancing using
> round-robin, or asking your ISP, but I've not done it, know of anyone
> who did or had enough need to actually follow any of my suggestions up
> to the next level.
> 
> So, I'm *guessing* yes.
> 
> --
> Onno Benschop
> 
> Connected via Optus B3 at S34°45'36.5" - E139°00'08.7" (Mount Pleasant, SA)
> --
> ()/)/)()        ..ASCII for Onno..
> |>>?            ..EBCDIC for Onno..
> --- -. -. ---   ..Morse for Onno..
> 
> Proudly supported by Skipper Trucks, Highway1, Concept AV, Sony Central, Dalcon
> ITmaze   -   ABN: 56 178 057 063   -  ph: 04 1219 8888   -   onno at itmaze.com.au
> 
> 
> _______________________________________________
> PLUG discussion list: plug at plug.org.au
> http://www.plug.org.au/mailman/listinfo/plug
> Committee e-mail: committee at plug.linux.org.au
> 
> _______________________________________________
> PLUG discussion list: plug at plug.org.au
> http://www.plug.org.au/mailman/listinfo/plug
> Committee e-mail: committee at plug.linux.org.au
>