[plug] Packets not showing up

[Angus McInnes]

192.168.1.255 is the network broadcast address, so even though you
only see one line it is actually broadcasting to all the computers on
the network.

On 2/5/06, Jon  Miller <jlmiller at mmtnetworks.com.au> wrote:
> I'm test driving a new product for a client and the program is supposed to work over port 42508.  What it does is a network discovery of the workstations and then allows you to push the program to those workstations.  Problem I'm having is seeing the packets on the internal iface of the gateway.  I've done this with the FW down.  I will see a single line and that's all.  Anyone have any idea why this is so?
>
> Thanks
>
>  #tethereal -i eth0 port 42508
> Capturing on eth0  0.000000 192.168.1.143 -> 192.168.1.255 UDP Source port: 1408  Destination port: 42508
>
>
> _______________________________________________
> PLUG discussion list: plug at plug.org.au
> http://www.plug.org.au/mailman/listinfo/plug
> Committee e-mail: committee at plug.linux.org.au
>


--
jibjibjib
http://yaytheblog.blogspot.com/