[plug] Wireless-N router for faster wireless....

[William Kenworthy]

are you sure? - looked at this a couple of days ago and it seems like
its doable between a ps3 and laptop according to Mr Google. - waiting
for the go ahead to actually try it, but I cant see why not from what I
read.

BillK


On Tue, 2009-01-20 at 11:08 +0900, Lucas van Staden wrote:
> Seems the PS3 cannot do ad-hoc, except with the PSP.
> 
> Thus the idea went to creating my own AP for it to connect to.
> 
> William Kenworthy wrote:
> > This is probably the way to go then - many client AP's wont do AP mode,
> > but it should do adhoc mode (basicly a peer to peer mode) - use the host
> > to bridge it onto the desired network.
> >
> > BillK
> >
> >
> > On Tue, 2009-01-20 at 10:59 +0900, Lucas van Staden wrote:
> >   
> >> Ok, this is just another wild idea.
> >>
> >> Just throwing ideas out there, checking all possibles, before I go spend 
> >> money, and find I could have done this without forking out cash.
> >>
> >> I have some spare pci wireless cards.
> >>
> >> Can I not add another card to the media server, and setup that card in 
> >> the media server to act as a access point, on it's own channel.
> >> I can then get the PS3 to connect to this access point, rather than the 
> >> actual router, and thus the PS3 and the mediaserver would have their own 
> >> seperate
> >> channel, thus their own bandwidth between them. In effect same setup as 
> >> having another AP on the network.
> >>
> >> As the media server has access onto the other network, I can then access 
> >> it from the other machines still.
> >>
> >> The next issue (if this is viable) is to get the ps3 to gain access to 
> >> the internet thereafter, but I would solve that as the next step.
> >>
> >> -Lucas
> >>
> >>
> >> William Kenworthy wrote:
> >>     
> >>> Yes, you have to separate the bandwidth - if you have two groups of
> >>> machines on different channels, you will need to bridge them - I think
> >>> upnp needs to be on the same subnet.  2nd cheap access point may be the
> >>> way to go?
> >>>
> >>> Also, if you can design it to be a totally isolated link, you might be
> >>> able to turn off WPA and gain quite a lot of bandwidth.  I would think
> >>> carefully about security and implications for the link ends first though
> >>> - I dont know enough about your endpoint and PS3 to say its safe or not.
> >>>
> >>> BillK
> >>>
> >>>
> >>> On Tue, 2009-01-20 at 10:02 +0900, Lucas van Staden wrote:
> >>>   
> >>>       
> >>>> Hi,
> >>>>
> >>>> I see.
> >>>>
> >>>> The netgear router I have is not that advanced.
> >>>> No QoS, and is a b/g router. Time for an upgrade me thinks.
> >>>>
> >>>> Basically (from the other post received) I gotta try and get the PS3 -> 
> >>>> MediaServer WAN on it's own channel.
> >>>>
> >>>> So other machines - channel 1
> >>>> PS3/Media Server - channel 6
> >>>>
> >>>> When they are on different channels, that then means they can't 'talk' 
> >>>> to each other? Correct?
> >>>> So my machines won't be able to access the media server, until I put 
> >>>> that back onto channel 1.
> >>>> This will be an issue.
> >>>>
> >>>>
> >>>> -Lucas
> >>>>
> >>>>
> >>>> William Kenworthy wrote:
> >>>>     
> >>>>         
> >>>>> If you have a g/a router, can you create a virtual AP on the A band for
> >>>>> the streams only? - or buy a second AP that does A?
> >>>>>
> >>>>> VLAN's with QOS may be another possibility depending on the capabilitoes
> >>>>> of the hardware.
> >>>>>
> >>>>> I can stream mythTV at SD over g while my son is playing games without
> >>>>> either being affected.  HD only works with the laptop next to the AP
> >>>>> (lack of bandwidth).
> >>>>>
> >>>>> In reality, separating the streams by using a second AP or spit as
> >>>>> suggested above is going to be the best solution.  Sharing bandwidth can
> >>>>> only go so far :(
> >>>>>
> >>>>> BillK
> >>>>>
> >>>>>
> >>>>> On Tue, 2009-01-20 at 01:40 +0900, Lucas van Staden wrote:
> >>>>>   
> >>>>>       
> >>>>>           
> >>>>>> Hi,
> >>>>>>
> >>>>>> I stream media using MediaTomb to my PS3,  and when any of the other 
> >>>>>> machines are very busy on the network, then the PS3 media stream lags, 
> >>>>>> and the video stutters badly.
> >>>>>>
> >>>>>> On my home network, I have my webserver, my media server, my office 
> >>>>>> machine, two laptops and of course the PS3.
> >>>>>>
> >>>>>> I am wondering about possible ways to improve the speed (or more 
> >>>>>> accurately, available bandwidth) between the media server and the PS3, 
> >>>>>> when I am busy with a stream.
> >>>>>>
> >>>>>> First thoughts - Hardware upgrades:
> >>>>>>
> >>>>>> I am considering updating my 'g' router to an 'n' router, and thus also 
> >>>>>> updating my network cards to 'n' compatible ones.
> >>>>>> I know the PS3 can only do 'g/b', but I figure if I upgrade the rest of 
> >>>>>> the network, to 'n', then the PS3 stream will have more bandwidth 
> >>>>>> available.
> >>>>>> Is my assumption correct here? Chances are that once the other machines 
> >>>>>> have more bandwidth available, they will just hog it all again, and I 
> >>>>>> will be back to where I started.
> >>>>>>
> >>>>>> Another option would be to go with the 'n' upgrade above, but also get 
> >>>>>> an extra router, and connect that direct to the PS3 wired network port, 
> >>>>>> and thus get the ps3 to get onto the 'n' network.
> >>>>>> Again, the other machines could just hog more bandwidth, as there are 
> >>>>>> more available.
> >>>>>>
> >>>>>> Second Idea:
> >>>>>>
> >>>>>> Throttle the other machines when I stream to the PS3.
> >>>>>> Personally I think the throttling would be the best (and cheapest) 
> >>>>>> option, and one that I can actually control.
> >>>>>>
> >>>>>> Any thoughts on this please, on how to improve the PS3/MediaTomb streams?
> >>>>>>
> >>>>>> -Lucas
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>> _______________________________________________
> >>>>>> PLUG discussion list: plug at plug.org.au
> >>>>>> http://www.plug.org.au/mailman/listinfo/plug
> >>>>>> Committee e-mail: committee at plug.linux.org.au
> >>>>>>     
> >>>>>>         
> >>>>>>             
> >> _______________________________________________
> >> PLUG discussion list: plug at plug.org.au
> >> http://www.plug.org.au/mailman/listinfo/plug
> >> Committee e-mail: committee at plug.linux.org.au
> >>     
> 
-- 
William Kenworthy <billk at iinet.net.au>
Home in Perth!