[plug] Minicom

[Jon L Miller]

I'm trying to get minicom to work on a SLES v11 and whenever I run it it
just states it cannot find /dev/modem I went through the setup (minicom -s)
to setup everything, but it still is not working.  Anyone have any ideas on
getting this to work.  I use it to configure cisco routers via the telnet to
the rollover cable to com1.

Should I be using /dev/modem or /dev/ttyS1 (or something like that)?

 

Jon L Miller

MMT Networks Pty Ltd

e: jlmiller at mmtnetworks.com.au

p: +618 9375 6597

m: +61 412 126 166

 

Disclaimer

This message contains confidential information and is intended only for the
individual named. If you are not the named addressee you should not
disseminate, distribute or copy this e-mail. Please notify the sender
immediately by e-mail if you have received this e-mail by mistake and delete
this e-mail from your system. E-mail transmission cannot be guaranteed to be
secure or error-free as information could be intercepted, corrupted, lost,
destroyed, arrive late or incomplete, or contain viruses. The sender
therefore does not accept liability for any errors or omissions in the
contents of this message, which arise as a result of e-mail transmission.

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.plug.org.au/pipermail/plug/attachments/20110216/e3203047/attachment.html>